Posted on March 21 2014 by 3Anetwork
The MA5600T supports the SHDSL service of multiple encapsulation modes, such as IPoA, PPPoA, IPoE, and PPPoE. Configure the SHDSL line profile. To configure the SHDSL line profile, run the shdsl line-profile add or shdsl line-profile add command. huawei(config)#shdsl...
Posted on March 20 2014 by 3Anetwork
How to configure the system time, time zone, time stamp, NTP (Network Time Protocol), and start/end time of the daylight saving time (DST) of the Huawei MA5600 /Huawei MA5683T to ensure that they are consistent with those in the actual condition. To set...
Posted on March 18 2014 by 3Anetwork
The Huawei MA5600 /Huawei MA5683T /MA5608T is dual-homed to BRAS 1 and BRAS 2. The working links are Link1 and Link2, and the protection link is Link3. If Link1 is faulty and Link2 is normal, the MA5600T/MA5603U/MA5608T can switch services to Link3 by...
Posted on March 12 2014 by 3Anetwork
How to control a user's authority to log in to the ME60 and how to configure a user's priority to improve ME60 security. Run: system-view The system view is displayed. Run: user-interface console interface-number The console user interface view is displayed....
Posted on March 11 2014 by 3Anetwork
How to query the statistics for a port, set the working mode of an optical module, and set the alarm thresholds for the receive optical power of the optical module through an uplink Huawei GPON port. When dual GPON ports are used for upstream transmission,...
Posted on March 10 2014 by 3Anetwork
The MA5683T supports the ADSL2+ service of multiple encapsulation modes, such as IPoA, PPPoA, IPoE, and PPPoE. This topic uses the PPPoE mode as an example to describe how to configure the ADSL2+ service. Configure the ADSL2+ line profile. You can configure...
Posted on March 7 2014 by 3Anetwork
I am replacing an Cisco 4006 with a Routing module. The replacement switch will be an stack of one 3750G and two WS-C3750V2-24PS-S The Routing module of the 4006 has 192.168.1.3 as IP address. And does some routing to two gateways. all traffic for network...
Posted on March 6 2014 by 3Anetwork
BFD provides link failure detection S3328TP-EI featuring light load and high speed. Static BFD for RIP is a mode to implement the BFD function. Run: system-view The system view is displayed. Run: bfd BFD is enabled globally. Run: quit Return to the system...
Posted on March 4 2014 by 3Anetwork
How to Configuring the Features of Kompella VPLS on Huawei LS-S5328C-EI-24S Run: system-view The system view is displayed. Run: bgp { as-number-plain | as-number-dot } The BGP view is displayed. Run: vpls-family The BGP-VPLS address family view is displayed....
Posted on March 3 2014 by 3Anetwork
On a network where the stack and Eth-Trunk are used, configure the Eth-Trunk to preferentially forward local interface traffic to increase bandwidth use efficiency between stack devices and improves traffic forwarding efficiency. This configuration is...
